Astm e1980 pdf
For any further information on MADCAD.com ASTM Standards Subscriptions, please contact us at [email protected] or +1 800.798.9296. accordance with ASTM C1549##, E90369, or E191870 and a minimum thermal emittance of 0.75 when tested in accordance with ASTM E40871 or C137172; or (b) a minimum solar reflectance index (SRI) of 75 calculated in accordance with ASTM E198073 for medium wind-speed conditions. The following comparative test data (based on constant solar conditions as defined) demonstrates the estimated surface temperature cooling benefit using Dulux ® ®InfraCOOL technology against the nominated system. ASTM C1107 PDF - 30 products Find ASTM C products and abstract using the BuildSite database. 202, Commissioning Process for Buildings and Systems and ASTM E2947, Standard Guide for Building Enclosure Commissioning is recommended for optimal use and application of this practice.
Codes and Approvals JM Membranes are designed with a cap, core, and bottom in order to utilize recycled content. Finally, based on the calculated values and standard conditions as specified in ASTM E1980, the solar reflectance index (SRI) and the surface temperature of the sample was calculated following the procedure in ASTM E1980. Utilizing a cool roof is an efficient way to reduce a building’s usage of cooling energy, although it may increase the usage of heating energy in winter. 45-mil was watertight after an impact energy of 12.5 J (9.2 ft-lbf) and 60-mil was watertight after 22.5 J (16.6 ft-lbf). low-sloped roofing material requirement for an SRI of at least 78, a concrete surface must have a solar reflectance of at least 0.64. Supply and installation of a one-component, ready-to-use, highly solar-reflective, UV and ponding-water resistant, liquid-applied waterproofing system in water dispersion, with S.R.I. An image of the sample is shown in figure 1, and as can be seen, the surface appearance is heterogeneous, so the test was performed in two distinct areas, which are referenced as "Light area" and "Dark area".
This document is available in either Paper or PDF format.
The determination of the solar reflectance index (SRI) according to ASTM E1980-11 standard was requested on the sample. Contact Soprema Customer Service or your Sales Representative for other available granule color options and special order requirements. In cold climates, during the winter, the sun angle is low, days are short, the sky is often cloudy, and most heating occurs during early morning or evening hours when the solar intensity is low. The computation generates a number from 0-100%, with 100% being the most reﬂective and thus least capable of generating a heat island. Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates . Cool Roof Rating Council (CRRC) performance values for CA Title 24, Energy Star are based on color families and will differ from those listed in table. Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces . Results obtained are tested values and were secured by using the designated test method.
3 IN 1 ROOF SRI of 43 is well within the Cool Roof Rating Council requirements for a cool roof. PRODUCT PROFILE First line, highest quality, non-yellowing 100 % acrylic floor sealer and finish. The SRI is calculated according ASTM E1980-01, which describes the standard practice for calculating Solar Reflectance Index of horizontal and low-sloped opaque surfaces. pdf (2mb) Abstract This study of soil stabilization emerges as an alternative in road construction to replace the conventional materials used in the granular layers and/or to improve the subgrade of the pavement structures, while taking advantage of the waste from oil extraction, in an attempt to mitigate the negative impacts on the environment. Flashing: GacoFlashFoam can be self-flashing at curbs, parapets, walls and penetrations. SRI is a calculated value based on solar reflectance, emissivity, and heat transfer coefficient of convection based on estimates of roof wind speed [Equation 1]. The ECRC Product rating program 24/03/2016 European Cool Roofs Council 28 ECRC Accredited/ approved labs Rated roof products. For Annual Book of ASTM Standards volume information, refer to the standardÕs Document Summary page on the ASTM website.
in accordance with the Solar Reflectance Index method in ASTM E1980 using a convection coefficient of 2.1 BTU/h-ft2 (12 W/m2K). ASTM standards and supporting materials are critical to the design and manufacture of global products and services. ASTM E1980 – Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces. The ECRC Product rating program 20/11/2016 European Cool Roofs Council 25 ECRC Accredited/ approved labs Rated roof products. It is built for protecting a wide range of substrates from the effects of moisture intrusion and weathering, is particularly effective as a protective coating over polyurethane foam on new or existing roofs.
ASTM D5796 – Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device. Permeance 20 mils @ 75 °F and 50% RH ASTM E96 – B, Inverted Cup 5.5 Perms 2.5 Perms min. Peak Advantage® Guarantee Information Product Terms When used in most JM PVC Systems* Up to 25 years *Contact JM Technical Services for specific systems. Total, diffuse, and specular reflectance is reported for the data at 20 degrees incidence. Star® Roof Products Program testing in accordance with ASTM C1371, ASTM C1549, ASTM E1980 and ASTM D1005 on their Insulating Paint coated on Metal Panel > White, Metal Panels. ASTM International standards are applied globally to products as varied as petroleum and consumer goods. ASTM E1980, 2011 Edition, January 1, 2011 - Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low- Sloped Opaque Surfaces This practice covers the calculation of the Solar Reflectance Index (SRI) of horizontal and low-sloped opaque surfaces at standard conditions. Division 1 - Quality Requirements: Testing, inspection and analysis requirements.
Provide roof system components from one manufacturer.
Cool Roof Rating Council (CRRC) performance valu es (for CA Title 24, Energy Star) are based on color families and will differ from those listed above. SRI method in ASTM E1980 2.using a convection coefficient of (12W/m K) or a minimum three-year-aged solar reflectance of 0.55 when tested in accordance with ASTM C1549, ASTM E903 or ASTM E1918 and a minimum three-year-aged thermal emittance of at least 0.75 when testing in accordance with ASTM C1371 or ASTM E408. Purchase your copy of ASTM E1980 - 11(2019) as a PDF download or hard copy directly from the official BSI Shop. The SRI (Solar Reflectance Index) noted represents the material's solar reflectivity and emissivity. ASTM E 1980 – Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces Heat Island Reduction Credit Changes in LEED v4 Project teams are allowed to register for either LEED v4 or LEED 2009 until June 1, 2015, after which LEED v4 will be the required rating system. 0.05 typical Ozone resistance, 100 pphm, 168 hours ASTM D1149 No cracks Resistance to water absorption After 7 days immersion 158 °F (70 °C) Change in mass, % ASTM D570 3.0 max. While the LRV values shown on this chart are typical, there can be slight variations between individual lots. R = initial Solar reflectivity (aStm e903, c1549) • e = emissivity (aStm c1371 or e408) • sRi = Solar reflective index (aStm e1980, based on medium wind speed) all metl-Span colors are formulated to provide premium energy-efficiency, solar reflectivity and maximum solar reflectance.
not lower than 100% in accordance with ASTM E1980, with VOC emission class labeling A+, with Fire class B-Roof (t1) in accordance with EN 13501-5. ASTM E1980(2011), Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low- Sloped Opaque Surfaces; American Society for Testing Materials: West Conshohocken, PA, USA, (2011). INDEX ..Solar reflectance, or albedo, refers to a material's ability to reflect the visible, infrared, and ultraviolet ..Hydraulic mulch is comprised of small pieces of cellulose fibers , which .Engineered wood products use trees more efficiently than traditional. ASTM E1980-11(2019) Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces. Solar reflectance measured in accordance with ASTM E 903-96, standard test method for solar absorptance, reflectance and transmittance of materials using integrating spheres.
ASTM E1980: Calculating Solar Reflectance Index of Horizontal and Low Sloped Opaque Surfaces. 0.87 All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. must have a solar reflectance of at least 0.28 using ASTM E1980 and an emittance of 0.90. The SRI is a measure of the roof’s ability to reject solar heat, as shown by a small temperature rise.
The determination of aged SRI is by performing through physical testing of “aged” (3-year-old) materials for reflectance and thermal emittance. ASTM D3462 / D3462M - 10a Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules . Aged solar reflectance calculated based on equation provided in California Energy Code (Title 24, Part 6). thermal-emittance values according to ASTM E1980, “Stan - dard Practice for Calculating Solar Reflectance Index of Hori - zontal and Low-Sloped Opaque Surfaces.” The higher a roof system’s SRI value, the cooler the roof system will be in the sun. ASTM E1980 n/a 110 Solar Reflectance Index (SRI) (3-year aged)3 ASTM E1980 n/a 103 ¹ Values reported as typical with the exception of thickness and thickness over scrim which are minimum. Solar reflectance values used in the SRI-WS shall be based on the aged reflectance value of the roofing product or the equation in Section A220.127.116.11 if the CRRC certified aged solar reflectance are not available.
Sarnafil® S 327-60 EnergySmart Roof Membrane is a PVC thermoplastic membrane produced with an integral polyester reinforcement for high strength, is highly reflective, with heat‐weldable seams, and a unique lacquer coating applied to the top of the membrane to reduce dirt pick up.